Dim-to-Warm No-Pixel Flexible Continuous LED Strip


Dim-to-Warm No-Pixel Flexible Continuous LED Strip

The JESCO Lighting’s NPX-DTW is a continuous band of flawless light output with no pixelated hot spots – even without a lens. NPX-DTW incorporates dim-to-warm technology to smoothly mimic the dimming curve of an incandescent lamp as it is dimmed. NPX-DTW strip is field-cuttable for shorter runs. Cut ends can be linked with connectors (sold separately). Easy installation to most surfaces by using pre-attached 3M® double-sided tape. The tape is dimmable using JESCO’s various dimming options.

  • Smoothly mimic the dimming curve of an incandescent lamp
  • A continuous band of flawless non-pixelated light output with no hot spots, even if installed without a lens.
  • 3000K at full brightness – dims down to 1800K
  • 3-Step MacAdam LED binning for uniformity in both color and intensity
  • Precise sizing – field-cuttable approximately every 2 ½ inches
  • Easy installation with 3M® adhesive tape
  • Large variety of channel and lens options are available
  • 3oz. PCB thickness for optimal thermal management mitigates voltage drop as the run length increases
  • TUYA and CASABI ready.

Ordering Information

Series Model CCT
DL-FLEX2 NPX-DTW – No-Pixel Dim-to-Warm 3018 – 3000K – 1800K

Note: When buying by a reel add -16FT to a model number

Spec overview

Input24V DC
Wattage Max.4.57 W/Ft
CCTs3000K to 1800K
Lumen383 Lm @3000K
Efficacy83 Lm/W
Max Run / Min Cut16' / 2 ½"
Dimensions½″W × ⅛″H
Beam Angle120°
Dimming MethodPWM
Dimming 0-10V, MLV, ELV, TRIAC, C•L, CASAMBI ready
LM8050,000 hours
EnvironmentIndoor - Dry, Damp

Accessories & Connectors

Plug and Play Power Cord
Length: 12″


Hardwire Power Cord
Length: 40″, 79″

Connecting Cable
Connects strip to strip
Length: 6″

Tape to Tape Connector 

Wiring Accessories


Extension Cable
Length: 48″, 96″
Finish: Black Finish Standard
Specify White Finish with -WH

2-Way Splitter

3-Way Splitter