DL-FLEX2 24V Low Volt Wall Washing LED Linear Lighting with Integral Optics
DL-FLEX2-BEAM

DL-FLEX2-BEAM

DL-FLEX2 24V Low Volt Wall Washing LED Linear Lighting
with Integral Optics

DL-FLEX2-BEAM is a specification-grade, high-lumen output flexible linear lighting with a fixed beam spread. Each diode on the DL-FLEX2 BEAM is encapsulated in a tight 10°×10°, a spot 30°×30°, or an asymmetrical 45° optic lens, making it perfect for wall washing and mounting on indoor and outdoor curved surfaces. DL-FLEX2 BEAM can be built-to-order up to 14′ in increments of 6″. The product can be dimmed when powered by a dimmable power supply with a primary side dimmer. DL-FLEX2 BEAM may be mounted with 3M® double-sided tape or snap-in mounting clips. A complete aluminum channel set with a clear lens is also available. DL-FLEX2 BEAM is designed for dry, damp, and wet locations.

  • Each LED is encapsulated in an optic lens for a precise beam angle.
  • 3-Step MacAdam LED binning for uniformity in both color and intensity.
  • Gold-plated solder pads provide exceptional electrical connectivity and are corrosion-free.
  • Field-cuttable.
  • Cut-ends can be linked with connectors. No soldering is required.
  • Easy installation with 3M® adhesive backing.
  • Dimmable with TRIAC, ELV, and 0-10V using JESCO’s various dimming options.
  • Extensive selection of aluminum mounting channels and lens options.
  • TUYA and CASABI ready.

Ordering Information

Series Model Integral Optics CCT/CRI
DL-FLEX2 BEAM 1010 – 10°×10° 2790 – 2700K 90CRI
3030 – 30°×30° 3090 – 3000K 90CRI
ASY45 – 45° Asymmetric* 4090 – 4000K 90CRI

* Consult Factory for availability and lead time.
Note: Order in increments of 6″ up to 14 ft.
See spec sheet for more info.

Spec Overview

Input24V DC
Watts6.0 W/Ft (BEAM-1010),
5.8 W/Ft (BEAM-3030, BEAM-ASY45)
Lumen @4000K480 Lm/Ft (BEAM-1010),
640Lm/Ft (BEAM-3030),
570Lm/Ft (BEAM-ASY45)
CCTs2700K, 3000K, 4000K
CRI90+
LED Density14 LED/Ft.
Max Run / Min Cut14' / 6"
Dimensions⅞” W × ⅜" H (20 × 9.1mm)
Beam Angle10º / 30° / 45° Integral Optic on each diode
Color Consistency3 Steps MacAdam
Dimming0-10V, MLV, ELV, TRIAC, CL, CASAMBI ready
LM7050,000 hours
Certificationsc-UL-us
EnvironmentIndoor/Outdoor - Dry. Damp, Wet (IP65)

Termination Options

Factory sealed to DL-FLEX2-BEAM


DL-AC-FLEX2-BEAM-HW08
DL-AC-FLEX2-BEAM-HW20

Power Cord with Hardwire Leads
Length: 8′, 20′

DL-AC-FLEX2-BEAM-EC
Clear Plastic Endcap
Must be used at the end of every run

DL-AC-FLEX2-BEAM-CC3
DL-AC-FLEX2-BEAM-CC6
DL-AC-FLEX2-BEAM-CC12

Connecting Cable
Length: 3″, 6″, 12″

DL-AC-FLEX2-BEAM-CC6-O
6″ Connecting Cable with Output Connection

DL-AC-FLEX2-BEAM-CC6-I
6″ Connecting Cable with Input Connection

DL-AC-FLEX2-CC-EXT18
18″ Extension Cable
for CC-06-O to CC06-I

Mounting Options


DL-AC-FLEX2-BEAM-CH4M22
4′ Metal Mounting Channel
22mm Height

DL-AC-FLEX2-BEAM-CH4M22-L01
4′ Clear Flat Lens
for use with DL-FLEX2-BEAMCH4M22 channel

DL-AC-FLEX2-BEAM-CH4M22-LEC
Live Endcap 

DL-AC-FLEX2-BEAM-CH4M22-DEC
Dead Endcap 

DL-AC-FLEX2-ADJBR-L
Universal Adjustable Bracket
30º increments of adjustability
2 per channel required

DL-AC-FLEX2-BEAM-MC
Plastic Snap-in Mounting Clip
3 per foot recommended

DL-AC-FLEX2-BEAM-CH4M22-MCM
Metal Channel Mounting Clip
for use with DL-FLEX2-BEAM-CH4M22

Components


CASAMBI Ready
(sold separately through
a third party)

www.p65warnings.ca.gov

Related Products