Full Spectrum Strip
DL-FLEX2-FS

DL-FLEX2-FS

FLEX2 Full Spectrum Tape

DL-FLEX2-FS is a market-leading LED tape with near-perfect color rendering. With a CRI value of greater than 95 (R1 to R15 all having values greater than 90), TM-30 Rf, and Rg values of greater than 95 and CQS value of greater than 95, this is by far the best LED tape if excellent color rendering is desired. Temperature sensing and constant current IC chips ensure a long lifetime and consistent light output even on long runs. The LEDs are 3 SDCM ensuring consistently from tape to tape. Sold by the reel or by the foot. The tape is Triac dimmable using our standard dimmable drivers or 0-10V dimmable using our LC-DIM-5A. Standard mounting with hi-bond adhesive tape. Also can be mounted using channels or mounting clips. TUYA and CASAMBI ready.

High-Density Strips Side-by-Side Comparison

Ordering Information

Series
Model
CCT / CRI

Spec Overview

Input24V DC
Wattage4.4 W/Ft
CRI95+
Color Consistency3 Step MacAdam
CCTs2700K, 3000K, 3500K, 4000K, 5000K, 6500K
Lumen298 Lm @4000K
Efficacy68 Lm/W @4000K
Max Run / Min Cut20' / 2"
Dimensions½”W × ⅛”H
Beam Angle120°
LED/Ft36
Dimmable0-10V, MLV, ELV, TRIAC, CL, CASAMBI ready
LM8050,000 hours
Certificationsc-UL-us
EnvironmentIndoor - Dry

Accessories & Connectors


DL-FLEX2-TB10-ICONN
FLEX2 Direct I connector.
Terminal block connects tape to tape.
Video

DL-FLEX2-TB10-LCONN
Direct corner L connector.
Terminal block connects tape to tape.
Video

DL-FLEX2-TB10-PC-PP
Plug and Play power cord. Connects Plug and Play equipment to LED strip.
12” cable length.
Can only be connected to ends cut along the cutting mark
Video

DL-FLEX2-TB10-PC-HW
Hardwire power cord. Connects hard-wire equipment to the LED strip.
12” cable length.
Can only be connected to ends cut along the cutting mark

Video

DL-FLEX2-TB10-CC12
Connecting cable with 12” wire. Connects cut ends of 2 LED strips.
Can only be connected to ends cut along the cutting mark

Video

DL-FLEX2-CLAMP-WT10A
Wire to Tape Connector for 10mm wide PCB
Quick Splice action, insert unstripped wire (wire not provided)
Dims: ⅝”(14.6mm) W × 1”(24.5mm) L × ⅜”(8mm) H

DL-FLEX2-CLAMP-TT10A
Tape to Tape Connector for 10mm wide PCB
Dims: ⅝”(14.6mm) W × ⅞”(19.5mm) L x ⅜”(8mm) H

DL-FLEX2-CLAMP-PC-10A
Plug and play power cord. Connects plug and play equipment to DL-FLEX2.
12” cable length.

DL-FLEX2-CLAMP-PC-HW-10A
Hardwire power cord. Connects hard-wire equipment to DL-FLEX2.
12” cable length.

DL-FLEX2-CLAMP-CC3-10A
DL-FLEX2-CLAMP-CC6-10A
DL-FLEX2-CLAMP-CC12-10A
Connecting cable
Connects tape to tape.
Length: 3″, 6″, 12″

Components


CASAMBI Ready
(sold separately through
a third party)

www.p65warnings.ca.gov

Related Products