High Density Static Strip


FLEX2 High Density Static Strip

DL-FLEX2-HD-CV is a high-density FLEX LED tape light featuring 72 LEDs per foot providing a uniform beam pattern. Field cuttable at every 1 inch, perfect for achieving precise run lengths eliminating overlaps or gaps.

  • Low profile and flexible (for 90° bends or tighter, do so at the cutting mark).
  • No ultraviolet (UV/IR) radiation, no mercury.
  • Field cuttable
  • Suitable for use in closet applications when installed with channel and lens in accordance with NEC
  • 3 Step MacAdam LED binning for uniformity in both color and intensity.
  • Do not twist the tape

High-Density Strips Side-by-Side Comparison

Ordering Information

Series Model CCT
DL-FLEX2 HD-CV – High Density 2780 – 2700-2900K 80CRI
3080 – 3000-3300K 80CRI
3580 – 3500-3700K 80CRI
4080 – 4000-4300K 80CRI
6080 – 6000-6500K 80CRI

DL-FLEX2-HD-CV is packed in 30 Ft. roll lengths. Max run is 14 Ft.
Specify required amount of 1″ lengths before the ordering number.

Spec Overview

Input24V DC
Wattage6.0 W/Ft
CCTs2700K, 3000K, 3500K, 4000K, 6000K
Lumen564 Lm @4000K
Efficacy94 Lm/W @4000K
Max Run / Min Cut14' / 1"
Dimensions½" W × ¹⁄₁₆" H
LED Density72
Beam Angle120°
DimmingTRIAC, 0-10V
LM8050,000 hours
EnvironmentIndoor - dry

Accessories & Connectors

Plug and play power cord. Connects plug and play equipment to DL-FLEX2.
Length: 40″

Hardwire power cord. Connects hard-wire equipment to LED strip
Length: 40″, 79″

Connecting cable with 6″ wire. Connects cut ends of 2 LED strips

Tape to Tape Connector for 10mm wide PCB

Switches & Sensors

In-line Capacitive Switch
Touch On/Off with Dimming
Spec Sheet

In-Line Short Distance Passive Infrared On/Off Switch for Doors
Spec Sheet

In-Line Passive Infrared Sensor Switch with Dusk-to-Dawn Motion Sensor
Spec Sheet