Long Run Flexible LED Strip DL‑FLEX2‑LR62

Home > Products > Flexible Linear LED > DL-FLEX2 Static White Series > DL-FLEX2-LR62

DL-FLEX2-LR62

Long Run Flexible LED Strip

One driver and on-board voltage regulators throughout the run allow for a very long max run of 62′ 4″ without significant voltage drop. The strip is field-cuttable every 1 ⁵⁄₁₆” for shorter runs. Cut ends can be linked with connectors (sold separately). Easy installation to most surfaces categorized as having high surface energy using pre-attached 3M® double-sided tape. The tape is dimmable using JESCO’s various dimming options.

Very long max. run – 62′ 4″
3-Step MacAdam LED binning for uniformity in both color and intensity
2oz. PCB thickness for optimal thermal management
Field-cuttable
Cut ends can be linked with connectors. No soldering required
Each reel comes with input plug & play power connectors pre‑assembled to each end of the reel.
Easy installation with 3M® adhesive tape
Low profile and flexible
Large variety of channel and lens options available
Plug and Play and Hardwire options available
No ultraviolet (UV/IR) radiation, no mercury
Dimmable

Ordering Information

Model	CCT
DL-FLEX2-LR62	3090 – 3000K 90CRI
	4090 – 4000K 90CRI

Note: Sold by foot or by reel. To order a reel add -62FT to model number.

Spec Overview

Input24V DC

Wattage 1.5 W/Ft

CCTs3000K, 4000K

CRI90+

LED Density18 LEDs/Ft.

Lumen112.1 Lm @4000K

Efficacy74 Lm/W @4000K

Max Run / Min Cut62' 4" / 1 ⁵⁄₁₆

Dimensions⁷⁄₁₆W × ⅛ H

Beam Angle120°

DimmingTRIAC, 0-10V

LM7050,000 hours

Certificationsc-UL-us

EnvironmentIndoor - dry

Accessories & Connectors

DL-FLEX2-TB10-ICONN
FLEX2 Direct I connector.
Terminal block connects tape to tape.
Video

DL-FLEX2-TB10-LCONN
Direct corner L connector.
Terminal block connects tape to tape.
Video

DL-FLEX2-TB10-PC-PP
Plug and Play power cord. Connects Plug and Play equipment to LED strip.
12” cable length.
Can only be connected to ends cut along the cutting mark
Video

DL-FLEX2-TB10-PC-HW
Hardwire power cord. Connects hard-wire equipment to the LED strip.
12” cable length.
Can only be connected to ends cut along the cutting mark
Video

DL-FLEX2-TB10-CC12
Connecting cable with 12” wire. Connects cut ends of 2 LED strips.
Can only be connected to ends cut along the cutting mark
Video

DL-FLEX2-CLAMP-WT10B
Wire to Tape Clamp Connector for 10mm wide PCB
Quick Splice action, insert unstripped wire (wire not provided)
Dims: ⅝”(14.6mm) W × 1”(24.5mm) L × ⅝”(8mm) H