Tunable White No-Pixel Flexible Continuous LED Strip
DL-FLEX2-NPX is the perfected flexible LED strip.
With the use of a Tunable White or DMX Control, the Tunable White tape may be dimmed and provides any white color temperature ranging from 2700K to 6500K, setting the mood for daytime or evening in residential or hospitality venues.
A continuous band of flawless non-pixelated light output with no hot spots, even if installed without a lens.
3-Step MacAdam LED binning for uniformity in both color and intensity.
Gold-plated solder pads provide exceptional electrical connectivity and are corrosion-free.
Industry-leading 3oz. PCB thickness ensures optimal thermal management and durability.
Field-cuttable.
Cut-ends can be linked with connectors. No soldering is required.
Easy installation with 3M® adhesive backing.
Extensive selection of aluminum mounting channels and lens options.
Each reel comes with an input hardwire power connector pre‑assembled to one end of the reel.
Note: Order in increments of 1 Ft. When purchasing reels add -16FT to the end of the part number. Hardware terminations pre-attached by factory – ready to install. See spec sheet for more info.
Spec Overview
Input24V DC
Wattage 4.60 W/Ft
CCTTunable White 2700K - 6500K
Lumen439 Lm @4000K
Efficacy95 Lm/W @White
Max Run16'
Min Cut2"
Dimensions⁷/₁₆" L × ⅛" W
Beam Angle120°
ControlCTA, DMX
LM7050,000 hours
Certificationsc-UL-us
EnvironmentIndoor - Damp
Connectors
DL-FLEX2-CRYSCONN10-TW-PC40-HW DL-FLEX2-CRYSCONN10-TW-PC79-HW Hardwire Power Cord. Connects hard-wire equipment to LED strip. Length: 40″, 79″
DL-FLEX2-CRYSCONN10-TW-CC06 Connecting Cable Connects cut ends of 2 LED strips. Length: 6″
DL-FLEX2-CRYSCONN10-TW-TT
Tape to Tape Connector for
⁷/₁₆” wide PCB
Connects cut ends were indicated by a cutting mark of an LED strip.