Outdoor RGB No-Pixel Flexible Continuous LED Strip

Home > Products Flexible Linear LED > NPX Series > DL-FLEX2-NPXWET-RGB


Outdoor RGB No-Pixel Flexible Continuous LED Strip

DL-FLEX2-NPXWET-RGB is the perfected flexible LED strip. A continuous band of flawless light with no pixelated hot spots, even when used without a lens. It is the perfect choice for designers looking for a completely smooth and uniform beam with an IP65 rating for outdoor use. Solder pads in gold plating provide exceptional electrical connectivity and are corrosion-free, while a 3‑oz PCB ensures optimal thermal management and durability. Color tunable with DMX or RF controllers. Mounts with hi-bond outdoor rated 3M® adhesive backing.
Made to order quickly to your desired length in 2″ (nominal) lengths with factory-attached input and output terminations, ready for field installation.

  • A continuous band of flawless non-pixelated light output
  • Rated IP65 for outdoor use.
  • Controllable with RF RGB or DMX controllers
  • Gold-plated solder pads
  • 3‑oz. PCB for optimal thermal management & durability.
  • Easy installation with outdoor-rated 3M® adhesive tape
  • TUYA and CASAMBI ready.

Ordering Information

Series Model Color
DL-FLEX2 NPXWET – No-Pixel Wet Locations RGB – Color Changing

Note: Specify required amount of 1 FT lengths before the ordering number.
When purchasing reels add -16FT to the end of the part number.
See spec sheet for more info.

Spec Overview

Input24V DC
Wattage 4.90 W/Ft
Lumen131 Lm Max.
Efficacy27 Lm/W Max.
Max Run / Min Cut16 ⅜" / 2"
Dimensions⅝" W × ¼" H (14 × 5 mm)
Beam Angle120°
DimmingRGB, RGBW RF Controller, DMX,
CASAMBI ready (indoor use only)
Op. Temperature-4° to 221°F (-20° to 105°C)
LM7050,000 hours
Certificationsc-UL-us, IP65
EnvironmentIndoor/Outdoor - Dry, Damp, Wet


79″ Hardwire Power Cord


10ml Silicone tube

Seal power connector and endcap to LED flexible strip


Switches & Sensors
Indoor use only

Indoor use only
(sold separately
through a third party)