Outdoor No-Pixel Flexible Continuous LED Strip
DL-FLEX2-NPXWET

DL-FLEX2-NPXWET

Outdoor No-Pixel Flexible Continuous LED Strip

DL-FLEX2-NPXWET is the perfected flexible LED strip. A continuous band of flawless light with no pixelated hot spots, even when used without a lens. It is the perfect choice for designers looking for a completely smooth and uniform beam with an IP65 rating for outdoor use. 3-Step MacAdam LED binning and high CRI of 90+ ensures uniformity in color output, intensity and excellent color rendering. Solder pads in gold plating provide exceptional electrical connectivity and are corrosion-free while 3-oz PCB ensures optimal thermal management and durability. TRIAC, ELV, 0-10V and RF dimmable using JESCO’s dimming options.
Mounts with hi-bond outdoor-rated 3M™ adhesive backing or installs with our extensive selection of aluminum channels and lenses. Made to order quickly to your desired length in precise 2” (nominal) lengths with factory-attached input and output terminations, ready for field installation. May be field-cut and assembled using our outdoor rated connections.

  • Rated IP65 for outdoor use.
  • A continuous band of flawless non-pixelated light output with no hot spots, even if installed without a lens.
  • Gold-plated solder pads provide exceptional electrical connectivity and are corrosion-free.
  • 3-Step MacAdam LED binning for uniformity in both color and intensity.
  • Industry-leading 3oz. PCB thickness for optimal thermal management and durability.
  • Easy installation with outdoor‑rated 3M™ adhesive tape.
  • Dimmable with TRIAC, ELV, 0-10V, and RF using JESCO’s various dimming options.

Ordering Information

To Order Factory-Assembled
To Order Field-Assembled
Model CCT INPUT TERMINATION OUTPUT TERMINATION
DL-FLEX2-NPXWET 2790 – 2700K 90CRI DL-FLEX-OD-PT-M DL-FLEX-OD-EC
  3090 – 3000K 90CRI DL-FLEX-OD-PC-HW DL-FLEX2-OD-CC03-SLDR
  4090 – 4000K 90CRI   DL-FLEX2-OD-CC06-SLDR
      DL-FLEX2-OD-CC12-SLDR
      DL-FLEX2-OD-CC24-SLDR
      DL-FLEX-OD-PT-F
      DL-FLEX-OD-PC-HW
Model CCT
DL-FLEX2-NPXWET 2790 – 2700K 90CRI
  3090 – 3000K 90CRI
  4090 – 4000K 90CRI

Note: Order in increments of 1 ¹⁵⁄₁₆”.
Terminations pre-attached by factory – ready to install.
If length needs to be altered in the field, outdoor rated connectors available (sold separately)
See spec sheet for more info.

Spec Overview

Input24V DC
Wattage 4.50 W/Ft
CCTs2700K, 3000K, 4000K
CRI90+
Lumen402.1 Lm @4000K
Efficacy90 Lm/W @4000K
Max Run16' 4 ⅞"
Min Cut1 ¹⁵⁄₁₆”
Dimensions½" H × ⅛" W
Beam Angle120°
DimmingTRIAC, ELV, 0-10V, RF
LM7050,000 hours
Certificationsc-UL-us, IP65
EnvironmentIndoor/Outdoor - dry, damp, wet

FACTORY-ASSEMBLED TERMINATION OPTIONS


11Outdoor input power connector

DL-FLEX-OD-PT-M
Outdoor Plug & Play Input Power Connector
Length: 12″

11Outdoor bare wire power lead wires

DL-FLEX-OD-PC-HW
Outdoor Hardwire Power Lead Wires
Length: 12″

11

DL-FLEX-OD-EC
FLEX-WETCC end cap

11

DL-FLEX2-OD-CC03-PASS
DL-FLEX2-OD-CC06-PASS
DL-FLEX2-OD-CC12-PASS
DL-FLEX2-OD-CC24-PASS
Connecting Cable
Pre-assembled between two pieces of the strip.
Length: 3″, 6″ 12″ & 24″

11Outdoor output power connector

DL-FLEX-OD-PT-F
Outdoor Plug & Play Output Power Connector
Length: 12″
Lock Nut Diameter: ¹¹⁄₁₆”

11Outdoor bare wire power lead wires

DL-FLEX-OD-PC-HW
Outdoor Hardwire Power Lead Wires
Length: 12″

FIELD-ASSEMBLED CONNECTORS


11

DL-FLEX2-ODCONN12-PC40-HW
DL-FLEX2-ODCONN12-PC79-HW
Hardwire Power Cord for Outdoor Rated Tape
Connects hard-wire equipment to LED strip
Length: 40″, 79″

11

DL-FLEX2-ODCONN12-CC08
Connecting Cable for Outdoor Rated Tape
Connects cut ends of 2 LED strips
Length: 8″

11

DL-FLEX2-ODCONN12-TT
Tape to Tape Connector for Outdoor rated tape

11

DL-FLEX2-OD-EC-L
Loose End Cap for Outdoor Rated Tape
Seals off cut end.

1110ml Silicone tube

SEALANT
10ml Silicone Tube

11www.p65warnings.ca.gov