Single Cut LED Strip
FLEX2-SC

DL-FLEX2-SC

FLEX2 Single Cut LED Tape

DL-FLEX2-SC is an LED tape cuttable after every individual LED. The very tight cut-length of only ⅜” means our DL-FLEX2-SC is the perfect solution for applications where very precise lengths are a requirement. With 36 LEDs per foot, this high-density tape provides a uniform beam pattern. DL-FLEX2-SC is a highly customizable tape that packs a powerful punch with a tiny footprint. Sold by the reel or by the foot. The tape is Triac dimmable using our standard dimmable drivers or 0-10V dimmable using our LC-DIM-5A dimming module. Standard mounting with hi-bond adhesive tape. Also can be mounted using channels or mounting clips.

High-Density Strips Side-by-Side Comparison

Ordering Information

Model CCT
DL-FLEX2-SC 2780 – 2700K
3080 – 3000K
3580 – 3500K
4080 – 4000K
5080 – 5000K
6580 – 6500K

Spec Overview

Input24V DC
Wattage 4.27 W/Ft
CRI80+
CCTs2700K, 3000K, 3500K, 4000K, 5000K, 6500K
Lumen449.0 Lm @4000K
Efficacy105.1 Lm/W @4000K
Max Run20'
Min Cut⅜"
Dimensions⁷⁄₁₆″W × ¹⁄₁₆″H
Beam Angle120°
LED/Ft36
DimmingTRIAC, 0-10V
LM8050,000 hours
Certificationsc-UL-us
EnvironmentIndoor - dry

Accessories & Connectors


11

DL-FLEX2-TB10-ICONN
FLEX2 Direct I connector.
Terminal block connects tape to tape.
Video

11

DL-FLEX2-TB10-LCONN
Direct corner L connector.
Terminal block connects tape to tape.
Video

11

DL-FLEX2-TB10-PC-PP
Plug and Play power cord. Connects Plug and Play equipment to LED strip.
12” cable length.
Can only be connected to ends cut along the cutting mark
Video

11

DL-FLEX2-TB10-PC-HW
Hardwire power cord. Connects hard-wire equipment to the LED strip.
12” cable length.
Can only be connected to ends cut along the cutting mark

Video

11

DL-FLEX2-TB10-CC12
Connecting cable with 12” wire. Connects cut ends of 2 LED strips.
Can only be connected to ends cut along the cutting mark

Video

11

DL-FLEX2-CLAMP-WT10A
Wire to Tape Connector for 10mm wide PCB
Quick Splice action, insert unstripped wire (wire not provided)
Dims: ⅝”(14.6mm) W × 1”(24.5mm) L × ⅜”(8mm) H

11

DL-FLEX2-CLAMP-TT10A
Tape to Tape Connector for 10mm wide PCB
Dims: ⅝”(14.6mm) W × ⅞”(19.5mm) L x ⅜”(8mm) H

11

DL-FLEX2-CLAMP-PC-10A
Plug and play power cord. Connects plug and play equipment to DL-FLEX2.
12” cable length.

11

DL-FLEX2-CLAMP-PC-HW-10A
Hardwire power cord. Connects hard-wire equipment to DL-FLEX2.
12” cable length.

11

DL-FLEX2-CLAMP-CC3-10A
DL-FLEX2-CLAMP-CC6-10A
DL-FLEX2-CLAMP-CC12-10A
Connecting cable
Connects tape to tape.
Length: 3″, 6″, 12″

11www.p65warnings.ca.gov