24V Low Voltage Flexible Linear

DL-FLEX2-SHO

FLEX2 Super High Output Tape

DL-FLEX2-SHO is a super high output LED tape. Market-leading 129.9Lm/W provides never before seen 1148Lm/ft. High LED density of 72 LEDs/ft provides a smooth and uniform beam. Short cut length of 1 ⁵⁄₁₆” means high customizability. Sold by the reel or by the foot. The tape is 0-10V dimmable using our LC-DIM-5A. Standard mounting with hi-bond adhesive tape. Also can be mounted using channels or mounting clips.

TUYA and CASAMBI ready.

High-Density Strips Side-by-Side Comparison

Ordering Information

Series
Model
CCT / CRI

Spec Overview

Input24V DC
Wattage8.9 W/Ft
Lumen1128 Lm @4000K
Efficacy127 Lm/W @4000K
CRI90+
Color Consistency3 Steps MacAdam - Single Bin LEDs
CCTs2700K, 3000K, 3500K, 4000K, 5000K, 6500K
Max Run / Min Cut10' / 1 ⅜”
Dimensions½" W × ⅛" H (10mm W × 1.8mm H)
Beam Angle120°
LED/Ft72
Dimming0-10V, MLV, ELV, TRIAC, CL, CASAMBI ready
LM8050,000 hours
Certificationsc-UL-us
EnvironmentIndoor - Dry

Accessories & Connectors


DL-FLEX2-TB10-ICONN
FLEX2 Direct I connector.
Terminal block connects tape to tape.
Video

DL-FLEX2-TB10-LCONN
Direct corner L connector.
Terminal block connects tape to tape.
Video

DL-FLEX2-TB10-PC-PP
Plug and Play power cord. Connects Plug and Play equipment to LED strip.
12” cable length.
Can only be connected to ends cut along the cutting mark
Video

DL-FLEX2-TB10-PC-HW
Hardwire power cord. Connects hard-wire equipment to the LED strip.
12” cable length.
Can only be connected to ends cut along the cutting mark

Video

DL-FLEX2-TB10-CC12
Connecting cable with 12” wire. Connects cut ends of 2 LED strips.
Can only be connected to ends cut along the cutting mark

Video

DL-FLEX2-CLAMP-WT10B
Wire to Tape Connector for 10mm wide PCB
Quick Splice action, insert unstripped wire (wire not provided)

DL-FLEX2-CLAMP-TT10B
Tape to Tape Connector for 10mm wide PCB

DL-FLEX2-CLAMP-PC-10B
Plug and play power cord. Connects plug and play equipment to DL-FLEX2.
12” cable length.

DL-FLEX2-CLAMP-CC3-10B
DL-FLEX2-CLAMP-CC6-10B
DL-FLEX2-CLAMP-CC12-10B
Connecting cable
Connects tape to tape.
Length: 3″, 6″, 12″

DL-FLEX2-CLAMP-PC-HW-10B
Hardwire power cord. Connects hard-wire equipment to DL-FLEX2.
12” cable length.

DL-FLEX2-TB10-WT
Wire-to-Tape Connector

DL-FLEX2-TB10-PC79-HW
Hardwire Power Lead
Length: 79″

DL-FLEX2-TB-PT-F
Tool-less terminal block
PT-F
Converts Hardwire to female PT connector
GUIDE

DL-FLEX2-TB-PT-M
Tool-less terminal block
PT-M
Converts Hardwire to male PT connector
GUIDE

Mounting clip for DL‑FLEX‑WETCC

DL-FLEX2-MC-10
Mounting Clip

Components


CASAMBI Ready
(sold separately through
a third party)

www.p65warnings.ca.gov

Related Products