IC controlled RGB Strip
FLEX2-UP-RGB

DL-FLEX2-UP-RGB

FLEX2 IC Controlled RGB Color Changing

The DL-FLEX2-UP-RGB Series is a modular color-changing lighting system. Constant current, IC controlled to provide 95%+ output at the end of runs. Designed with quick-connectors every 12″ for easy installation. Specifiers can create light output that can be varied and also programmed to almost any color desired including appropriate Pantone© PMS colors**, allowing the highest level of lighting sophistication. Made of highly flexible material that can be applied to most surfaces categorized as having high surface energy using pre-applied 3M™ double-sided tape. Controllable with our wide range of RGB and DMX controllers.

** Pantone PMS colors may not match 100% perfectly due to the color difference between light emission and ink.

RGB, RGBW & RGBWW LED Strips Comparison

Ordering Information

Model CCT
DL-FLEX2-UP RGB – Color Changing

Spec Overview

Input24V DC
Wattage (White)3.95 W/Ft
CCTsRGB
Lumen123.0 Lm (White)
Efficacy31.5 Lm/W (White)
Max Run20'
Min Cut3 ¹⁵⁄₁₆"
Dimensions11 ⅞" L × ⅜" W × ⅛" H
Beam Angle120°
LED/Ft18
ControlRGB, DMX
LM8050,000 hours
Certificationsc-UL-us
EnvironmentIndoor - dry

Accessories & Connectors


DL-FLEX2-RGB-X-CONN DL-FLEX2-RGB “X” Connector

DL-FLEX-RGB-X-C
DL-FLEX2-RGB-X-CONN

Universal “X” Connector
Connects four DL-FLEX-UP-RGB or DL-FLEX2-UP-RGB strips.
Cut to make 2-way “L” connection or 3-way “T” connection

Blank FLEX-UP Tape Midconnector

DL-FLEX-RGBCC6
DL-FLEX-RGBCC12
Blank FLEX-UP-RGB tape Mid-Connector
Length: 6″, 12″

4" section of DL-FLEX2-UP-RGB

DL-FLEX-UP-4-RGB
DL-FLEX2-UP-4-RGB
4” Section of RGB Strip

44" RGB Input Power Connector

DL-FLEX-RGB-PC
44” Input Power Connector
38″ wire + 5 ⅞” FLEX-UP tape.
Connects hard-wire equipment to DL-FLEX-UP-RGB

15" RGB Output Power Connector

DL-FLEX-RGB-PT
15” Output Power Connector
9″ Bare Wire + 6″ DL-FLEX tape with FLEX-UP connector.
Connects DL-FLEX-UP-RGB to hard-wire equipment.

www.p65warnings.ca.gov