RADIANZ Portable Power System
BATT-LI

Home > Products > Accessories > RADIANZ Portable Power System

BATT-LI

RADIANZ Portable Power System

The new RADIANZ Portable Power System, designed for use with JESCO’s broad range of LED lighting products, provides the perfect solution for powering stand-alone exhibits, kiosks, and gondolas, both permanent or temporary, without the cost of bringing power to the fixtures. The designer has the freedom to plan the space effectively to maximize traffic flow without being limited by the location of the power source.
These exhibits can be easily relocated as the needs of the space change, without the cost of re-wiring the space. The RADIANZ BATT-LI series is a portable, lithium-ion battery pack. Available in three capacities, the RADIANZ powers all of JESCO’s 12V, 24V, or 350mA LED fixtures at the lowest cost per watt hour in the market. Plug & Play power connections, an on/off switch, a four-level charge indicator, and an audible low battery warning make the battery pack very user-friendly.
A plug-in charger is provided with each battery. A 100% charge is achievable in 3-5 hours depending on the capacity.

  • LED charge level indicator
  • Quick re-charging
  • Over-discharge protection
  • Over-charge protection
  • Short-circuit protection
  • Audible low battery warning
  • 100Wh and 150Wh capacity batteries come with a 5V USB port for charging phones and tablets – max output 2A

Ordering Information

Model Output Capacity
BATT-LI 12V – 12V 100WH– 100Wh
24V – 24V 150WH – 150Wh
350MA – 350 mA 266WH – 266Wh

Spec Overview

Input Charging13V / 60W - use supplied charger
Output12V / 24V / 350mA
Capacity100Wh / 150Wh / 266Wh
Full charge time3 hours / 4 hours / 5 hours
Integral USB PortYes (100Wh & 150Wh)
Cycle Life>500 times, then 80% capacity
EnvironmentIndoor - Dry

Included


Battery Charger
Included with each battery

Voltage Regulator
Must be used with 24V Batteries
Included with 24V batteries

Current Regulator
Must be used with 350mA Batteries
Included with 350mA batteries

Output Cable
Included with 12V batteries

ACCESSORIES


DL-PS-EXT48
DL-PS-EXT96
Extension Cable
Length: 24″, 48″, 96″

DL-PS-2Y
2-Way Split Power Feed
Overall Length: 18 ¼”

DL-PS-3Y
3-Way Split Power Feed
Overall Length: 23 ½”

DB-CV-DC/AMP1
1-Port Distribution Block

DB-CV-DC/AMP3
3-Port Distribution Block

DB-CV-DC/AMP6
6-Port Distribution Block

DB-CV-PD/PD-6
6-Port Distribution Block with PB input and output connector

PS-CC-R-DC/PBF-3
3” Adaptor Cable. DC to PB Connector

DL-PS-PT-M
Input Power Cable with hard-wire leads

18" Input Power Connector

DL-FLEX-PC
Input Power Cable with Ribbon PCB for DL-FLEX-UP series Tape.

12 5/8" Input Power Connector

DL-FLEX-PC2
Input Power Cable for DL-FLEX-UP sereis Tape.

8" Plug & Play Power Connector

DL-FLEX-HD-PC
12” Input Power Cable for DL-FLEX-UP-HD Tape.

S601-PC
S601-PC-WH
18” Input Power Cable for S601 & S602 Series

S650-PC
Input Power Cable for S650

S902-PC
Input Power Cable for S902

ST-PF-I-WH
Input Power Feed for Smart Track (ST-TR Series)

Components


www.p65warnings.ca.gov