High LED Density RGB Strip


FLEX2 High Density RGB

DL-FLEX2-RGB-HD is JESCO Lighting’s High Density RGB tape utilizing the new 3535 RGB LEDs. The tiny LEDs allow a high LED density per foot to be achieved, which was not possible in the past using the older 5050 LEDs. 36 LEDs per foot results in a uniform light output allowing designers unparalleled freedom to achieve their desired look. Sold by the reel or by the foot. The tape is controllable with JESCO’s various RGB controllers. Standard mounting with hi-bond adhesive tape. Also can be mounted using channels or mounting clips.

RGB, RGBW & RGBWW LED Strips Comparison

Ordering Information

Series CCT
DL-FLEX2 RGB-HD – High-Density Color Changing

Spec Overview

Input24V DC
Wattage (White)3.84 W/Ft
Lumen198.0 Lm (White)
Efficacy30.0 Lm/W
Max Run20'
Min Cut1 ¹⁵⁄₁₆"
Dimensions⁷⁄₁₆” W × ³⁄₁₆” H
Beam Angle120°
ControlRGB, RGBW RF Controller, DMX, CASAMBI ready
LM8050,000 hours
EnvironmentIndoor - dry

Accessories & Connectors

In-line Connector for the DL-FLEX2-RGB-HD

In-line connector.
Connects tape to tape

Hardwire Power Connector for the DL-FLEX2-RGB-HD

Hardwire power cord with 7 ¾” wire

Flexible Connecting Cable for the DL-FLEX2-RGB-HD

Flexible Connecting Cable
5 ¹⁵⁄₁₆” (15cm) in length
Connects tape to tape