24V Dual Bending Wall Washing LED Linear with Integral Optics


24V Dual Bending Wall Washing LED Linear
with Integral Optics

DL-FLEX2-BEAM-DB is a duo-bending specification grade flexible linear lighting with a fixed beam spread. Each diode on the BEAM-DB is encapsulated in an 30° optic lens, making it the perfect product for wall washing and mounting on indoor and outdoor curved surfaces. BEAM-DB can be built-to-order up to 16’ in increments of 12”.
The product can be dimmed when powered by a dimmable power supply with a primary side dimmer. BEAM-DB may be mounted with different types of mounting clips. DL-FLEX2-BEAM-DB is designed for dry, damp, and wet locations

  • Each LED is encapsulated in an optic lens for a precise 30° beam angle.
  • 3-Step MacAdam LED binning for uniformity in both color and intensity.
  • Field-cuttable.
  • Cut-ends can be linked with connectors. No soldering is required.
  • Easy installation with mounting clips and brackets.
  • Dimmable with TRIAC, ELV, and 0-10V using JESCO’s various dimming options.
  • TUYA and CASAMBI ready.

Ordering Information

Series Model CCT/CRI
DL-FLEX2 BEAM-DB 2790 – 2700K 90CRI
3090 – 3000K 90CRI
4090 – 4000K 90CRI

Note: Order in increments of 12″ up to 9 ft.
See the spec sheet for more info.

Spec Overview

Input24V DC
Watts5.8 W/Ft
Lumen @4000K540 Lm/Ft
CCTs2700K, 3000K, 4000K
LED Density8 LED/Ft.
Max Run / Min Cut16' / 12"
Min Beding Radius5"
Dimensions⅞" W × ½" H
Beam Angle30º integral optic on each diode
Color Consistency3 Steps MacAdam
Dimming0-10V, MLV, ELV, TRIAC, CL, CASAMBI ready
LM7050,000 hours
EnvironmentIndoor/Outdoor - Dry. Damp, Wet (IP65)

Termination Options

Factory sealed to DL-FLEX2-BEAM

Cord with Hardwire Leads
Length: 12″

Connecting Cables
Length: 12″

I-Joint Connector


Mounting Options

Mounting Clip

90° Bracket
Must use with mounting clip


(sold separately through
a third party)


Related Products